AutoCAD顧問
還沒有註冊嗎...即日起免費註冊,所有最完整的AutoCAD討論、教學及資源都在論壇裡喔~

[討論]Double click改唔到字及一定要入了command先可以選object

向下

[討論]Double click改唔到字及一定要入了command先可以選object

發表 由 BC27 于 2014-10-14, 16:01

唔知改左甚麼setting or command Double click改唔到字及一定要入了command先可以選object
1.Double click改唔到字,包括Text & Mtext
可否定layer鎖左或相關問題
因為入了command edit可選相關字作修改

2.原先可以入command前選object,但現在必須入command先

如下是最前入的command

代碼:
DIST
Specify first point:
Specify second point or [Multiple points]:
Distance = 50.0000,  Angle in XY Plane = 0,  Angle from XY Plane = 0
Delta X = 50.0000,  Delta Y = 0.0000,   Delta Z = 0.0000

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command: CO
COPY
Select objects: *Cancel*

Command:
Command:  COPY

Select objects: 1 found

Select objects:
Current settings:  Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>: *Cancel*

Command:
Command:  COPY

Select objects: 1 found

Select objects: *Cancel*

Command:
Command: E
ERASE
Select objects: 1 found

Select objects:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*

Command:
Command: E
ERASE
Select objects: 1 found

Select objects:
Command: DD
DIMLINEAR
Specify first extension line origin or <select object>:

Select object to dimension: *Cancel*

Command:
Command: *Cancel*

Command: *Cancel*

Command: DD
DIMLINEAR
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 3000
Command: *Cancel*

Command:
Command: MA
MATCHPROP
Select source object:
Current active settings:  Color Layer Ltype Ltscale Lineweight Transparency Thickness PlotStyle Dim Text Hatch Polyline Viewport Table Material Shadow display Multileader

Select destination object(s) or [Settings]: *Cancel*

Command: *Cancel*

Command:
Command: MA
MATCHPROP
Select source object:
Current active settings:  Color Layer Ltype Ltscale Lineweight Transparency Thickness PlotStyle Dim Text Hatch Polyline Viewport Table Material Shadow display Multileader

Select destination object(s) or [Settings]: Specify opposite corner:

Select destination object(s) or [Settings]: *Cancel*

Command: *Cancel*

Command:
Command:
Command: _qsave
Command: RAY
Specify start point:
Specify through point:
Specify through point: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: CO
COPY
Select objects: *Cancel*

Command: *Cancel*

Command:
Command: CO
COPY
Select objects: 1 found

Select objects:
Current settings:  Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: RO
ROTATE
Current positive angle in UCS:  ANGDIR=counterclockwise  ANGBASE=0

Select objects: l
1 found

Select objects:
Specify base point:
Specify rotation angle or [Copy/Reference] <270>:
Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: ED
DDEDIT
Select an annotation object or [Undo]:
Select an annotation object or [Undo]: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command:
Command: MA MATCHPROP
Select source object:
Current active settings:  Color Layer Ltype Ltscale Lineweight Transparency Thickness PlotStyle Dim Text Hatch Polyline Viewport Table Material Shadow display Multileader

Select destination object(s) or [Settings]:

Select destination object(s) or [Settings]: *Cancel*

Command: *Cancel*

Command: DI
DIST
Specify first point:
Specify second point or [Multiple points]:
Distance = 194.9821,  Angle in XY Plane = 270,  Angle from XY Plane = 0
Delta X = 0.0000,  Delta Y = -194.9821,   Delta Z = 0.0000

Command: *Cancel*

Command: *Cancel*

Command:
Command: O
OFFSET
Current settings: Erase source=No  Layer=Source  OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <50.0000>: 200

Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=Extend
Select cutting edges ...
Select objects or <select all>: 1 found

Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:

Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: E
ERASE
Select objects:
Command: E
ERASE
Select objects: 1 found

Select objects:
Command: *Cancel*

Command: DD
DIMLINEAR
Specify first extension line origin or <select object>: *Cancel*

Command: *Cancel*

Command:
Command: E
ERASE
Select objects: *Cancel*

Command:
Command: E
ERASE
Select objects:
Command:
Command:  ERASE

Select objects: 1 found

Select objects:
Command:
Command:
Command:
Command:
Command: *Cancel*

Command:
Command:
Command:
Command: *Cancel*

Command: ED
DDEDIT
Select an annotation object or [Undo]:
Select an annotation object or [Undo]: *Cancel*

Command:
Command: M
MOVE
Select objects: 1 found

Select objects:
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>:
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*

Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*

Command: *Cancel*

Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command: TR
TRIM
Current settings: Projection=UCS, Edge=Extend
Select cutting edges ...
Select objects or <select all>: 1 found
avatar
BC27
一般會員
一般會員

文章總數 : 44
年齡 : 27
來自 : HK
職業 : 繪圖員
愛好 : 踢足球
個性 : 開朗
使用年資 : 3
使用版本 : 2013
經驗值 : 2299
威望值 : 6
注冊日期 : 2012-11-10
男 處女座 馬

回頂端 向下

回復: [討論]Double click改唔到字及一定要入了command先可以選object

發表 由 judyyai 于 2014-10-15, 09:04

關於你的問題~
檔案已幫你取消 改代碼陳述~

請參考以下看看
*[己解決]文字編輯器

____________________________________________________________________________________
avatar
judyyai
管理顧問
管理顧問

文章總數 : 7654
年齡 : 40
來自 : 台南
職業 : 機械製圖
愛好 : 電腦相關
個性 : think too much...
使用年資 : 10↑
使用版本 : AC2014(開始於2015九月底)
AutoCAD基礎篇等級 : 10星級
積分 : 392
最佳解答 : 1
經驗值 : 27460
威望值 : 3472
發帖精華 : 2
回帖精華 : 4
注冊日期 : 2008-11-19
2D基礎函授 3D基礎函授 顧問外掛程式 經典問與答讀者 藍鵲2號
2009聚會勳章 串連貼紙成功 女 巨蟹座 蛇

回頂端 向下

回頂端


 
這個論壇的權限:
無法 在這個版面回復文章